Page 17 of 27
7.Put the Removable Burner Cover(D) on the Burner when not in use
5. Attach a Stud(
①
) to Table Top(F) with the Screwdriver(
⑪
).
Align the mounting position of Door Frame Leg(J), Support Leg(K) and the leg on Door
Panel(G) to the Stud(
①
) on the Table Top(F).
Attach the Door Frame Leg(J), Support Leg(K) and the leg on Door Panel(G) to the
Stud(
①
) on the Table Top(F) using a Washer(
②
), Spring Washer(
③
) Nut(
④
) and the
Wrench(
⑫
).
Stand the table right side up.
Now, fully and securely, tighten all nuts and bolts, at all joints.
Add a Rubber Cap(
⑩
) on all bolt ends to protect skin or clothing from getting snagged.
6. Place the Burner(E) into the Table Top(F), rotating slightly to face the left side of the
door opening.
Burner Control
(controls should face the
door, rotated towards the
left side of the opening)
Noble House Home Furnishings LLC
Page 17 OF 27
