Page 15 of 27
⑨
Nut(M6)
13
⑩
Rubber Cap(M8)
5
⑪
Screwdriver
1
⑫
Wrench
1
⑬
Allen Key
1
⑭
Extra Adjustable
Leveller
1
Assembly Steps
1. Check that the Control Knob(13) for the gas supply system is turned to the “OFF”
position before starting any assembly.
2. Affix a stud(
⑤
) to the mounting position on the Door Frame Leg(J), Support leg(K) and
the Leg of the Door Panel(G) with a Screwdriver(
⑪
) as shown in picture 1.
First, starting with the Door Frame Leg(J), attach the Door Frame Leg(J) to Panel 2(I)
using a Washer(
⑦
), Spring Washer(
⑧
) Nut(
⑨
), and the Wrench(
⑫
).
Then, attach the Support Leg(K) to the assembled Frame(I&J) using a Washer(
⑦
), Spring
Washer(
⑧
) Nut(
⑨
), and the Wrench(
⑫
).
Assemble Legs and Panels in sequence as shown in the picture.
DO NOT OVERTIGHTEN
Noted: After assembling frame, the mounting position at the bottom of Panel(I)
should face down.
Picture 1
⑦
⑧
⑨
Noble House Home Furnishings LLC
Page 15 OF 27
