Noaton AC 5109, Инструкция по эксплуатации

Страница: 6 / 16

6
General principles
Before starting the air conditioner for the first time, please carefully read through the entire
instruction manual
.
After taking receipt of the appliance, check it carefully to see whether it has suffered any damage
during transport. In the case of any damage, you must inform the sender immediately.
After transport, allow the air conditioner to stand in a vertical position for 6 hours before being
switched on.
Keep the packaging of the air conditioner stored in a safe place so that you can safely repackage the
unit and send it for a service, if required. In those places where it has been glued using sticky tape,
the packaging can be simply cut through and folded up for easier storage.
Cooling principles of the air conditioner
Cooling works best in spaces that have been well sealed, so that there is as little heat intake from
sunlight as possible. Leave doors closed, draw the curtains/blinds, and if possible try and cool the
room before using it. This procedure is especially suitable with e.g. bedrooms, which should be
cooled in advance before going to bed in order to avoid having to keep the air conditioner running
overnight.
Technical specifications
Model Noaton AC 5109
Power source AC 220-240 V/1 Ph/50 Hz
Air flow 330 m
3
/h
Dehumidifying capacity (30 °C, 80% RV) 2.3 l/h
Maximum cooling capacity 9000 BTU
Power consumption (cooling mode) 950 W
Cooling current 4.3 A
Operating temperature 15°C–43°C
Refrigerant type R290 / 0.2 kg
GWP coefficient 3
Equivalent CO
2
0.0006 t
Noise 55 dB(A)
Dimensions 320 x 320 x 740 mm
Length and diameter of the air hose 160 cm/Ø 151 mm
Length of power cable 188 cm
Inner diameter of the outflow hose 16 mm
Net weight 24 kg
Gross weight 28.5 kg
Battery for the remote control 1x CR2025 – 3V