2
Introduction
7
Installation
Thank you for choosing NOAM NR
Bluetooth remote controller. We invested
a lot of time and effort planning and
designing the perfect cotroller for your
audio system.
The NR controller went through three
rounds of QC before being packed.
If at any given time you have any
questions or concerns, please feel free
to contact us at: [email protected]
Enjoy your ride!
NR wires and plugs diagram
Amplifier-Controller DIN plug
Amplifier-Controller DIN plug
Remote In - Blue Wire
The remote-in is an extra feature we added to the NR. Connecting the
remote-in wire to a remote-out wire of another device will allow this
device to trigger your NR ON/OFF.
*note. It’s an optional feature only. You don’t need to use this wire in
order to run your NR.
The NR controller has a DIN
plug. This plug can be connected
directly to the NOAM NA2 & NA4
amplifiers.
Remote power triggering:
The NR is able to power the NA
amplifiers. whenever you turn
the NR ON or OFF the NA2/4
amplifier will do the same.
Aux input -
optional
If you already had a peripheral music device on your bike such as satellite
radio, MP3 player or GPS, you will take the audio output from that device
and plug it into the female 1/8” mini plug.
* When not in use, please keep the AUX plug sealed by keeping the
protective cap closed.
Remote In
Aux input
