HOME THEATER PC CHASSIS
Model: HTPC 200 BA & SA
Color: Black & Silver
Quick Installation Guide
(U.S. & Canada Only)
Version 1.0
DISCLAIMER
No warranty or representation, either expressed or implied, is made with respect to the content of this documentation, its quality, performance, merchantability, or fitness for a
particular purpose. Information presented in this documentation has been carefully checked for reliability; however, no responsibility is assumed for inaccuracies. The information
contained in this documentation is subject to change without notice.
In no event will nMedia will be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use this product or documentation, even if
advised of the possibility of such damages.
TRADEMARKS
All trademarks used in this user guide are the property of their respective owners.
COPYRIGHT
© 2006 by NMEDIA SYSTEM, INC. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any
language in any form by any means without the written permission of NMEDIA SYSTEM, INC.
TECHNICAL SUPPORT
If a problem arises with your system and no solution can be obtained from this user guide, please contact your place of purchase or local dealer.
REVISION HISTORY
V 1.0
August, 2005
Note:
This user guide is designed to provide the user a quick reference for chassis setup. We assume you need the information
regarding how to assemble the system, such as Motherboard, CPU, RAM Memory, Hard Drive, DVD ROM, Operating System…,
etc. Based on this assumption, we make this user guide of quick installation guide. Please follow the description step by step to
install the components. If you have any question in assembling the system, please refer your questions to the appropriate
Technical Support of the component vendors.
Safety Warning
Turn down the CPU Cooler Fan Speed through the Front Controller may create vital damage to CPU. Adjust
Fan Controller (CPU F.R.S.) appropriately according to the CPU instruction. (Minimum Fan Speed at 2000 is
recommended)
“RESET” button is for LCD Module only
(CPU Fan Speed is default to minimum speed of 1800 to prevent CPU damage)
