NKT Photonics Koheras ADJUSTIK, Руководство по эксплуатации продукта

Страница: 80 / 105

Placing the laser on a table or shelf
80
that there is adequate airflow at the rear of the laser so that the cooling fins can
effectively dissipate the heat generated by the laser.
To avoid injury and damage, NKTP recommends that when rack mounting the
Koheras ADJUSTIK two persons are present. One person can position the laser
while the other fastens it to the rack.
Figure 53 Image of the laser rack mounted
Placing the laser on a table or shelf
For installations where the laser is placed on a level surface, the laser is
equipped with four (4) rubber feet on its bottom panel (
Figure 54
). Be sure to
include adequate space at the rear of the laser so that the cooling fins can
effectively dissipate the heat generated by the laser. Additionally the surface
should be free from vibrations and any source that could cause temperature
variations.
Figure 55
shows the laser placed on a solid table-top with no nearby
heat sources and with adequate free-space for the cooling fins.
Rack mounting flange
with finger grips
x4
2