NKT Photonics A203-000-001, Руководство по эксплуатации продукта

Страница: 75 / 77

75
Signaling and CONTROL configuration
6. Using BNC cabling and splitters, connect the MOD1 to 8 pins to the +3.3 V
output pin on the COMMAND. When wavelengths are selected with FSK
inputs, the corresponding MOD pin must be pulled high.
7. Connect the FSK1 to 8 and BLANK pins to your application.
8. The system is ready and channels are selected based on the signals shown
in
Figure 50
.
Figure 50 Fast wavelength switching: 16 λ setup
CONTROL Channel/Profile
Profile 2
V+
MOD1
in
ch1 profile 2
ch2 profile 2
ch3 profile 2
ch4 profile 2
ch5 profile 2
ch6 profile 2
ch7 profile 2
ch8 profile 2
FSK1
in
FSK2
in
FSK3
in
FSK4
in
FSK5
in
FSK6
in
FSK7
in
FSK8
in
Blank
in
V+ V+ 0V
ch1 profile 4
ch2 profile 4
ch3 profile 4
ch4 profile 4
ch5 profile 4
ch6 profile 4
ch7 profile 4
ch8 profile 4
V+ 0V V+ 0V V+ 0V V+ 0V V+ 0V V+ 0V V+ 0V 0V
Profile 4
AOTF Channel selected
Application signals