http://www.nke-instrumentation.com
Tel 02-97-36-41-31 Fax 02-97-36-55-17
PAGE 18/18
8.
INSTALLATION OF RUBBER PROTECTIONS
As per the following photos:
- Slide and mount all the protections.
- Maintain the rubber protection of the Turbidity sensor using a BLACK Colson-type collar so as to avoid any
offset on the turbidity measurement.
8.1
STBD-PR POSITIONING FOR RADIO OPERATION
The radio antenna is positioned on the side of the CTN bracket and fields of view of the Turbidity sensor.
For maximum radio range, the STBD-PR must be free of any mechanical obstruction over its entire length, on
the side of the CTN sensor and fields of view of the Turbidity sensor.
9.
MECHANICAL LAYOUT
10. END OF LIFE
The STBD-PR is an electronic equipment.
According to the Directive Waste of Electric and electronic Equipments (WEEE), this equipment must be
collected by an organism approved for the selective collection of the WEEE.
