8
67_Pad_Display_UM_UK_13
Once on the TIMER page you can also press
to arm your TIMER via the menu.
(§4.3.2)
4.3.2 Key OK (T1 et T2)
When you select a Multidisplay or a Multigraphic with the PAD Display and you
display a page where the TIMER channel appears, pressing
causes the
appearance of popup windows:
- First popup: "Arm TIMER T1". The TIMER channel displays the duration “T1”
configured in the “TIMER” sensor instead of the 4 lines indicating that the data is
empty.
- Second popup: "Start TIMER". The TIMER channel will count down the seconds
from T1.
- Third popup: "Synchronize T2". This allows for example to reset the stopwatch to a
phase of the procedure such as the preparatory signal at 4 minutes.
- Fourth popup: "Stop TIMER". This returns to the empty channel with 4 lines.
