6
67_Pad_Display_UM_UK_13
4. USE IN A TOPLINE BUS
4.1 Select of a display
To select a display with the Pad Display, press
until the second beep (5
seconds). You’ve accessed the selection mode. Then press on the left or right arrow
to toggle between displays. You may press several times until you find the desired
display.
This operation is required on the first use, as by default no display
is selected.
- Selecting TL25:
Press on
until the second beep, then with
and left and right arrows
you can select the TL25. Once the TL25 is selected, the upper line flashes. Press
to confirm this display is selected. Then you can modify the upper line using
up and down arrows of
. To change line, use
. Press and long hold
to access the sub-channel. Press
to change the sub-channel. Press and hold
long
to exit.
- Selecting Multigraphic:
Press
until you hear a second beep and choose a display using the left and
right arrows of
: Once Multigraphic has been selected, a remote control (version
2.3) or a yellow box (version 2.4) appears, then press
to confirm. The keypad
works the same way as the one on the Multigraphic.
Refer to the manual of Multigraphic V2.4 or newer.
- Selecting Multidisplay:
Press
until you hear a second beep and choose a display using the left and
right arrows of
: Once the Multidisplay has been selected, a yellow box appears
and press
to confirm.
Refer to the Multidisplay manual.
