- 8 -
33-60-049-000
AIS Receiver–processor / User manual
1.4. TECHNICAL SPECIFICATION
•
Dual frequencies (161.975 MHz – 162.025 MHz simultaneously)
•
Sensitivity <-106dbm
•
Processes both AIS class (A and B) messages
•
Power supply: 12 volts
•
Power consumption: ~ 100mA
•
GPS input NMEA0183 (4800 bauds). Uses « RMC » NMEA sentence
•
PC output NMEA0183 (38400 bauds). « RMC » sentences are multiplexed with A.I.S.
messages.
•
Protection IP20 (not waterproof)
•
Weight 250g
•
Dimensions: 145mm x 65 mm x 40 mm
2 FIRST-LEVEL TROUBLESHOOTING
In this section you will find information to help you handle small problems yourself. Please take
time to read the table for solutions before calling technical support.
Issue
Possible Causes and solutions
GPS is powered on but the LED indicator does not
flash green
The LED indicator does not flash red, while a vessel
transmitting A.I.S. is in range
The PC navigation software does not read any
A.I.S nor GPS data
Check the GPS output. NMEA 4800 bauds and « RMC »
sentence outputs are required.
Check wiring for VHF antenna or splitter
Check the serial port parameters. The RS232 input must
be 38400 bauds
In the event that you cannot solve the problem by yourself, please contact you dealer.
3 INSTALLATION
3.1. LIST OF ACCESSORIES
- 90-60-417: Topline connection kit. Junction box and cables
.
3.2. INSTALLATION CAUTION
The A.I.S Receiver/Processor is not waterproof. It must be installed in a protected
environment.
3.3. MOUNTING THE A.I.S. RECEIVER/PROCESSOR UNIT
The unit is fastened with Ø 4mm screws.
