6 65_Apparent_Wind_Monitor_FR_11
3.1.2 Setup with a Multidisplay
The mast height setup is done with a Multidisplay in the same way as with a
Multigraphic.
In the sensor menu, select Apparent Wind Speed, and then the height value. Enter
the value and confirm with OK.
3.2 Mast angle setup
Done by your installer: Enabling the mast angle function (if a sensor is connected):
The mast angle function is disabled by default (factory settings) on the Apparent
Wind Monitor. With the help of the Toplink software, enable this function and set the
MAST_SENSOR value to 1.
3.2.1 Mast angle sensor setup with a MULTIGRAPHIC
Press and hold
to access the menu from which you can select
to display
the "Sensors" page. Select the mast angle function created by the Apparent Wind
Monitor.
- Configuration of the mast angle offset
+
+
+
