17
There are three parameters to set up the UPS.
•
Parameter 1:
For program alternatives. Refer to
below table.
•
Parameter 2-3:
The settings options or values for each
program.
Interface
Settings
01:
Output voltage settings
Parameter 3
: you may choose the
following output voltage:
200:
presents output voltage is 200Vac
208:
presents output voltage is 208Vac
220:
presents output voltage is 220Vac
230:
presents output voltage is 230Vac
(Default)
240:
presents output voltage is 240Vac
02:
Frequency Converter enable/disable
Parameter 2&3
: Enable or disable
converter mode. You may choose
the following two options:
CF ENA
: converter mode enable
CF DIS:
converter mode disable
(Default)
03:
Output frequency settings
Parameter 2&3
: Output frequency
setting. You may set the initial
frequency on battery mode:
BAT 50:
presents output frequency
is 50Hz
Engli
sh
Română
Содержание PWUP-OL100AT-AZ01B
Страница 52: ......