Njoy ACUP-SN000MP-AZ01B, Руководство пользователя

Страница: 8 / 15

14 15
Chart 4-6
4.4.2 E-mail
It’s allowed to send alarm mail by SMTP server. To use this function, the
e-mail service must be correctly configured. All values in this function page
are default empty. This action can’t be executed without the SMTP informa -
tion, e-mail account and password. Besides, the sender account should be
allowed for SMTP/POP3 forwarding.
Select System Configuration >> E-mail . Refer to Chart 4-7
Chart 4-7
1. Enter SMTP server, security type (supported encryption from SMTP serv -
er), SMTP port, sender’s E-mail address, user name and password. Click
checkbox of “Need Auth” for password verify.
2. Enter correct e-mail accounts in Receive list. Then, click “Apply” to add
into receivers list. Click “Delete” button to delete e-mail account.
3. Click “Apply” to save the changes. The “Test” button can be used to send
a test e-mail to all receivers to confirm correct operation. When the test
e-mails are successfully sent to specific recipients, it will pop up a suc -
cessful message on operated PC. Otherwise, it will pop up a failure dialog
to indicate there is an error for parameter setting.
4. You may decide who will receive daily report e-mail at specific duration.
Please enter recipient’s Email Address and timer into columns. Then, click
“Apply” button to set up this action. You also can configure who will re -
ceive alarm e-mail when event log exceeds 100 or data log exceeds 50 re -
cords. Please click checkbox of selections.
4.4.3 SMS
• Sending SMS By Server
It is required to have service software available such as ViewPower Pro. In
the event of an alarm condition occurring, a message about UPS status will
be sent to the specified users via mobile phone. Please refer to Chart 4-8 b.
• Sending SMS By Serial Port
It is used EMD port as data transmission to send SMS without any service
software. Please configure Baud rate of GSM Modem as 9600 and then
connect data transmission port (€) of SNMP web port card to GSM Modem
with a RJ11 to DB9 cable. Please refer to Chart 4-8 a for detailed wiring.
Chart 4-8 a