NIXER PD Dante, Руководство пользователя, Страница: 7 / 43

PD Dante version 2.02 rev a - 31/10/18
7
General Precautions
•
Do not place heavy objects on the PD Dante, expose it to sharp objects or handle it
in any way that may cause damage, e.g., rough handling and/or excessive vibration.
• Do not subject the equipment to dirt, dust, heat or vibration during operation or
storage. Never expose the console to rain or moisture in any form. Should the unit
become wet, turn it off and disconnect it from the power source without further
delay. The equipment should be given sufficient time to dry out before
recommencing operation.
• When cleaning the PD Dante, never use chemicals, abrasive substances or solvents.
•
The front panel should be cleaned using a soft brush and a dry lint-free cloth. For
persistent marks, use a soft cloth and isopropyl alcohol.
• Keep these instructions for future reference. Follow all warnings in this manual and
those printed on the unit.
• The PD Dante must be connected following the guidance in this manual. Never
connect power amplifier outputs directly to the PD Dante. Connectors and plugs
must never be used for any other purpose than that for which they are intended.
• The equipment must be powered from an appropriate source which can be via the
PoE input and/or the USB input. Use both inputs for redundancy purposes.
• The PD Dante must not be operated inside a case or enclosed as the housing acts as
a heatsink for the components inside.
•
Refer servicing to qualified technical personnel only.