Instruction Manual
NivuLink Micro
page 18
NivuLink Micro - Rev. 02/13.11.2018
3
Shipping, Storage and Transportation
3.1 Delivery
The standard NivuLink Micro data logger comes with:
•
1 x user manual with declaration of conformance. The manual describes all
steps needed to install and operate the instrument.
•
1 x NivuLink Micro data logger
•
1 x standard antenna model: NLF0 ANT MULT SMA
•
1 rechargeable battery pack NLG0 AP5414
3.2 Reception inspection
Check the packaging for visible damage immediately after receipt. Any possi-
ble damage in transit shall be instantly reported to the carrier. Furthermore a
written report shall be sent to NIVUS GmbH in Eppingen.
Incomplete deliveries shall be reported in writing either to your local representative or
directly to the NIVUS head office in Eppingen within two weeks.
Important note
Mistakes cannot be rectified later.
3.3 Storing
Observe the minimum and maximum values on environmental conditions such as
temperature and humidity according to chapter
The measurement transmitter shall be protected from corrosive or organic solvent
vapours, radioactive radiation as well as strong electromagnetic radiation.
Always store the instrument in its original packaging.
3.4 Transportation
Although the NivuLink Micro and its sensors are designed for operation in
challenging industrial environments, the device should be protected against shocks,
impacts, shaking and vibrations.
Use the original packaging for transport.
3.5 Return
For returns please proceed as follows:
•
Fill in a return form and send it with your return. Each return should be accom-
panied by one return form. You will find the return form in the service area of
the NIVUS homepage. The RMA no. must be specified. Please call the hot-
line+49 (0)7262 9191-841 for the RMA no.
•
In case of a required reshipment return the unit at customer cost to NIVUS
GmbH in Eppingen using the original packaging.
Insufficiently franked shipments will not be accepted.
