7 Initial startup
NivuLink Micro - Rev. 02/13.11.2018
page 51
7.4.5
Measurement channels
The following options are available in the Channels tab:
•
External channels
: Option for configuring the external sensors.
•
Internal channels
: This option is enabled only in the Service screen.
External channels
Configure the external sensors here.
The NivuLink Micro has 4 universal inputs. Each universal input is configured in one
double line.
1
Enable / disable the input
2
Entry field for the name of the input
3
Drop-down menu where the input mode is selected.
The table below contains a detailed description of the modes.
4
Drop-down menu to select the calculation method:
Factorization
,
Formula
or
Interpolation
The selection is relevant only as soon as Calculation (
7
) is enabled
(=checked) ist.
5
When (
4
) =
Factorization
: input field for the factor
When (
4
) =
Formula
: input field for the formula
6
Opens the value table used to configure the interpolation values
7
Enables / disables the further calculation of measurement values
8
Enables / disables the switching contact which can be set on the server
(switching contact can only be set in
Permanent
operation mode.)
Fig. 7-8: NivuLink Micro configuration tool: Channels > External channels
