User Manual
Proprietary & Confidential
Page 9
version 1.0
The Nivis RF Module 6.0 has been certified per FCC Part 15 rules for integration into
products without further testing or certification. To fulfill the FCC certification
requirements the OEM of the Nivis RF Module must ensure that the information
provided on the Nivis RF Module 6.0 Label is placed on the outside of the final product.
The Nivis RF Module 6.0 is labeled with its own FCC ID Number. If the FCC ID is not
visible when the module is installed inside another device, then the outside of the device
into which the module is installed must also display a label referring to the enclosed
module. This exterior label can use wording such as the following:
“Contains Transmitter Module FCC ID: xxx-xxxxxxxx”
or
“Contains FCC ID: xxx-xxxxxxxx”
The OEM of the Nivis RF Module 6.0 must only use the approved antenna, which has
been certified with this module.
The OEM of the Nivis RF Module 6.0 must test their final product configuration to
comply with Unintentional Radiator Limits before declaring FCC compliance per Part 15
of the FCC rules.
7. Warning (Part 15.21)
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
