background image

 

 

User Manual 

 

 

Proprietary & Confidential 

Version 1.1 

Table of Contents 

 

1.

 

Purpose and Scope of Document......................................................................... 1

 

2.

 

Overview of the Radio Modem Hardware............................................................. 1

 

3.

 

Operation of the Nivis Radio Modem ................................................................... 4

 

3.1. Getting started ...................................................................................................... 4

 

3.2 Read Calibration EEPROm ...................................

Error! Bookmark not defined.

 

3.3 Transmission .........................................................

Error! Bookmark not defined.

 

3.4 Reception ..............................................................

Error! Bookmark not defined.

 

3.5 Modify Register Values ..........................................

Error! Bookmark not defined.

 

3.6 Additional Features................................................

Error! Bookmark not defined.

 

4. RF Exposure Limit Warning ..................................................................................... 8

 

5. Compliance Statement (Part 15.19) ......................................................................... 8

 

6. OEM Responsibility to the FCC Rules and Regulations ........................................ 8

 

7. Warning (Part 15.21).................................................................................................. 9

 

Содержание RF-P9-06-01-01













Отзывы: