manualshive.com logo in svg

Nivetec Signet 2760 DryLoc, Руководство по эксплуатации продукта, Страница: 4 / 8

Поделиться
Скачать
Nivetec Signet 2760 DryLoc Скачать руководство пользователя страница 4

4

Signet 2760 DryLoc pH/ORP Preampli

fi

 er

The 2760 DryLoc Preampli

fi

 er can be used to connect Signet 275X Wet-Tap electrodes to a pH or ORP instrument.

1.  Select the process 

fi

 tting.

•  Select a low pro

fi

 le installation saddle (customer-supplied) with a 1½ in. or 2 in. outlet (depending on 3719 model ordered).

•  The 3719 is available with NPT or ISO thread options.

•  The 3719 can also be adapted to 

fi

 t into tee 

fi

 ttings. Refer to the 3719 pH Wet-Tap instructions for detailed information.

2.  Install the Wet-Tap and the electrode.

•  Install the 3719 into the 

fi

 tting, then insert the electrode into the assembly.

3.  Attach the preampli

fi

 er to the electrode.

•  Attach the 3-2760-11 or -21 Preampli

fi

 er to the DryLoc 

fi

 tting at the top of the electrode.

4.  Connect the 2760 Preampli

fi

 er to the instrument.

•  The 2760 Preampli

fi

 er signal can be routed to any 5700 or 8750 pH/ORP instrument (see Pg. 5).

2760 Submersible models used as in-line system:

The Submersible 2760 design can also be used in-line when 
using the 2724-2764, 2764-2767 series or the 2774-2777 
series electrodes.

BEFORE YOU START:

 

2764-2767: Install a 1 in. NPT pipe tee in the process line.

 

2774-2777 and 2724-2726: Install a ¾-in. reducing tee in 
the process line. 

DO NOT

 install in a ¾-inch tee or probe 

will be damaged.

1.  Wrap the process threads on the electrode with an 

appropriate sealant (example: PTFE tape) to create a 
water-tight connection.

2.  Lubricate O-rings with a non-petroleum based, viscous lubricant (grease) compatible with the system.
3.  Remove the threaded nut from the preampli

fi

 er and place it around the electrode from the bottom as illustrated.

4. 

HAND-TIGHTEN 

the electrode into the installation 

fi

 tting. 

DO NOT USE TOOLS!

5.  Seat the 2760 DryLoc connector onto the top of the electrode.
6.  Lift the threaded nut up and thread it hand-tight onto the preampli

fi

 er.

 

When the 2760 Preampli

fi

 er is fully assembled with one of the threaded electrodes (276X and 277X models) it will stand 

approximately 178 mm (7 in.) from the process threads to the top of the preampli

fi

 er.

178 mm

(7 in.)

2760 Preamplifier

Electrode

Threaded nut

Lubricate O-ring

2

1

3

4

5

6

•  The 2760 Preampli

fi

 er signal can be routed to a Signet 5700 ProPoint pH Monitor, or to any model of the 3-8750 pH Transmitter.

•  If the preampli

fi

 er cable must be extended beyond the standard 4.6m (15 ft) that is supplied with the 2760, use a junction box to 

terminate the wires.

 

Note:

 Do not extend the 2760 cable more than 120 m (400 ft).

In-line Assembly and Installation

Wet-Tap Assembly and Installation

RELA  1 

2 

4 

Lubricate O-rings

Lubricate O-rings

1.

2.

3.

4.

Содержание Signet 2760 DryLoc









Отзывы:

Нет отзывов