Nivetec Echo Smart Series, Руководство по эксплуатации и установке, Страница: 26 / 73

- Page 17
-
Figure 4.15: Initial Controller Setup
4.4.2. First Time Controller & Sensor System Installation (Figure 4.16 and 4.17)
If this is a new installation, select
First Time Controller & Sensor System
Installation
and press the Soft Key next to
New System Installation
(Figure 4.15).
The Controller will automatically locate the Smart Sensor that has been powered
(this will take a few seconds) and will open the Initial Sensor Setup Display (Figure
4.16).
Figure 4.16: Initial Sensor Setup
Follow the Soft Key Prompts and use the Navigation Keys to enter the Sensor Name
and Sensor Address. It is imperative that the Sensor Address be changed from 01