Nivetec Echo Smart Series Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 73

Nivetec Echo Smart Series Скачать руководство пользователя страница 13

- Page 4

-

4. EchoSmart Controller

– Graphical User Interface

(ESC)

The EchoSmart Controller allows for

programming and local monitoring of one to sixteen

EchoSmart Sensors.

4.1.

General Overview

The Controller display consists of a graphical backlit LCD (2.6 x 3.45 inch viewing
area) that is divided into five functional sections. Soft Keys and Navigation Keys
located to the right of the screen are used for data entry and other operations. Figure
4.1 points out the functional sections of the screen and the location of the Soft Keys
and Navigation Keys.

Figure 4.1: The LCD Display

4.1.1.

Operator Interface Overview (Figure 4.1)

The display has five informative sections:

Smart Sensor Name & Address
The bar at the top of the display shows the name and network address that has been
assigned  to  the  sensor.  This  is  the  sensor  that  is  currently  being  interrogated.
Information on this and all other displays relates to this sensor.

If  the  Controller  is  operating  a  multi-sensor  field  network,  other  sensors  are
available by pressing the

Change Sensor

soft key. A listing of network sensors will

appear (See Figure 4.12). Use the Navigation Keys to select the desired sensor and
press

Select Sensor

.

Sensor Name & Address

Current Measurement
and Operating Gain

“Help Prompts” Field

Soft Key
Prompts

Soft Keys Navigation

Keys

Main Display Area

«
...
11
12
13
14
15
...
»

Содержание Echo Smart Series










































































Отзывы:

Нет отзывов