Chapter
3: Web Management
Security - Switch - Access Management
NGSME24G4S User Manual | 47
3.1.4.6. Security - Switch - Access Management
Configure access management table on this page. The maximum number of entries is 16. If
the application's type match any one of the access management entries, it will allow access
to the switch.
Mode
Indicates the access management mode operation. Possible modes are:
Enabled:
Enable access management mode operation.
Disabled:
Disable access management mode operation.
Delete
Check to delete the entry. It will be deleted during the next save.
Start IP address
Indicates the start IP address for the access management entry.
End IP address
Indicates the end IP address for the access management entry.
HTTP/HTTPS
Indicates that the host can access the switch from HTTP/HTTPS interface if the host IP
address matches the IP address range provided in the entry.
SNMP
Indicates that the host can access the switch from SNMP interface if the host IP address
matches the IP address range provided in the entry.
TELNET/SSH
Indicates that the host can access the switch from TELNET/SSH interface if the host IP
address matches the IP address range provided in the entry.
Buttons
Add New Entry:
Click to add a new access management entry.
Save:
Click to save changes.
Reset:
Click to undo any changes made locally and revert to previously saved values.