NWA100 Access Point
13
non-11n mode.
9. Extension Channel:
This is used to enhance data throughput ability for 802.11n devices on the network.
10. WMM-Capable:
WMM is QoS for your wireless network. Enabling this option may better stream wireless
multimedia data such as video or audio (recommended).
11. ASPD Capable:
Select to enable/disable the auto power saving mode. By default, this option is disabled.
12. Maximum Clients:
Total clients should be within 124.
5GHz Wireless Basic
1. Select Wireless Network:
8 SSIDs are available here.
2. Enable:
Select it to enable wireless feature. As for 2.4GHz, only the first SSID is enabled by default and it
can’t be disabled. Up to 8 SSIDs can be enabled at the same time.
3. SSID Broadcast:
This option allows you to have your network name (SSID) publicly broadcast or if you
choose to disable it, the SSID will be hidden. It is enabled by default.
4. AP Isolation:
Isolates clients connected to the same SSID.
5. SSID:
This is the public name of your wireless network. Select the SSID you wish to configure from the
drop-down list.
6.
Wireless Mode:
Select a right mode according to your wireless client. The default mode of 5GHz is 11a/n.
11a mode:
Select it if you have only 11a wireless devices in your wireless network. Up to 54Mbps wireless rate
is supported on this mode.
11a/n mode:
In this mode wireless connection rate is negotiated. Up to 450Mbps wireless rate is supported
on this mode.
7. Channel:
Select 149, 153, 157, 161, 165 or Auto in 11a mode and select 149, 157 or Auto in 11a/n mode. The
best selection is a channel that is the least used by neighboring networks.
8. WMM-Capable:
WMM is QoS for your wireless network. Enabling this option may better stream wireless
multimedia data such as video or audio (recommended).
9. ASPD Capable:
Select to enable/disable the auto power saving mode. By default, this option is disabled.
10. Maximum Clients:
Total clients should be within 124.
