NWA100 Access Point
12
3.5 Wireless
3.5.1 Basic
Select 2.4GHz or 5GHz to configure basic settings.
2.4GHz Wireless Basic
1. Select Wireless Network:
8 SSIDs are available here.
2. Enable:
Select it to enable wireless feature. As for 2.4GHz, only the first SSID is enabled by default and it
can’t be disabled. Up to 8 SSIDs can be enabled at the same time.
3. SSID Broadcast:
This option allows you to have your network name (SSID) publicly broadcast or if you
choose to disable it, the SSID will be hidden. It is enabled by default.
4. AP Isolation:
Isolates clients connected to the same SSID.
5. SSID:
This is the public name of your wireless network. Select the SSID you wish to configure from the
drop-down list.
6.
Wireless Mode:
Select a right mode according to your wireless client. The default mode of 2.4GHz is
11b/g/n mixed.
11b mode:
Select it if you have only 11b wireless devices in your wireless network. Up to 11Mbps wireless rate
is supported on this mode.
11g mode:
Select it if you have only 11g or 11n wireless devices in your wireless network. Up to 54Mbps
wireless rate is supported on this mode.
11b/g mixed mode:
Select it if you have 11b and 11g wireless devices in your wireless network. Up to 54Mbps
wireless rate is supported on this mode.
11b/g/n mixed mode:
Select it if you have 11b, 11g and 11n wireless devices in your wireless network. In this
mode wireless connection rate is negotiated. Up to 450Mbps wireless rate is supported on this mode.
7. Channel:
Select from 1~13 channels or Auto. The best selection is a channel that is the least used by
neighboring networks.
8. Channel Bandwidth:
Select a proper channel bandwidth to enhance wireless performance. Select 20/40M
frequency width when device is operating in 11n, select 20M frequency width when device is operating in
