Niveo Professional NWA 100 Скачать руководство пользователя страница 11

Страница: 11 / 32

NWA100 Access Point

1. MAC Address:

Displays connected wireless client’s MAC address.

2. Link Rate:

Displays the link speed rate between this device and the connected wireless client.

Note

-----------------------------------------------------------------------------------------------------------------------------

If no clients are connected to this device, a prompt message will appear: There is no wireless client

connected to the device!

-----------------------------------------------------------------------------------------------------------------------------------------

3.4 Network

3.4.1 LAN Settings

Here you can configure the LAN IP address, subnet mask, gateway and DNS servers.

Note

-----------------------------------------------------------------------------------------------------------------------------

Default LAN IP:192.168.2.200, default subnet mask: 255.255.255.0.

If you change the default IP address, you must use the new IP address to re-log in.

-----------------------------------------------------------------------------------------------------------------------------------------

Содержание NWA 100

































Результаты поиска

Содержание NWA 100

Отзывы:

Похожие инструкции для NWA 100

Бренды по названию

Популярные бренды

Niveo Professional NWA 100, Руководство пользователя

Результаты поиска

Содержание NWA 100

Отзывы:

Похожие инструкции для NWA 100

Бренды по названию

Популярные бренды