NIVELCO NIPRESS DD-400, Руководство пользователя

Страница: 14 / 17

ddc4f52a0600p_01 14 / 17
Menu 29 – Load default settings
This option restores the factory default value for all settings. To
reset the factory defaults, press the two buttons at the same time after
selecting this option. Note that any changes you have made so far will be lost,
so the password will also be reverted to “0005.”
Menu 30 – Display mode
Assigning the desired input signal to the display value (“P1,” “P2”
or “DIFF”)
Menu 31 – Load configuration
Load configuration stored on the device (Menu 32). (Choose from
1 to 5).
Menu 32 – Store configuration
Saves the device configuration settings. Select a number between
1 and 5.
SPECIAL MENUS:
To access the special menu, select “PAof” with the “ ” or “ ” button, then
press both buttons to activate the menu item. “1” appears on the display.
Special menu 1 – Full-scale compensation
Full-scale compensation is necessary if the indicated value for full
scale differs from the real full-scale value in the application; compensation is
only possible with an appropriate reference source if the deviation of the
measured value is within the defined limits.
Set “0238” with the “ ” and “ ” keys; confirm with both buttons; “FS S” will
appear on the display. Now it is necessary to connect the pressure reference,
which corresponds to the measuring range’s end value, to P1. P2 must stay
open! Press both keys again, to store the signal being emitted from the
pressure switch as full scale; the display will show the set endpoint, although
the entire range detection signal has been shifted.
Please note that the analog output signal (on devices with analog output)
remains unaffected by this change.
Special menu 2 – Set password
Enter “0835”; apply setting by pressing the two keys together; the
display will say “SEtP”; now set the password using the “ ” - or “ ” -keys.
Any number from 0 to 9999 can be entered except for the following code
numbers: 0238, 0247, 0729, and 0835. After entering the new code number,
save it by pressing the two buttons together.