(18) Use a cabtyre cable or a cabtyre extension cable
when it is used outside.
(19) Stay alert.
・
Watch what you are doing.
・
Bear in mind the way of handling/operation and the
circumstances of the surrounding area.
・
Use common sense.
・
Do not operate tool when you are tired.
(20) Check damaged parts.
・
Before further use of the tool, an accessory or other
part that is damaged should be carefully checked to
determine that it will operate properly and perform its
intended functions.
・
Check for alignment of moving parts, binding of moving
parts, breakage of parts, mounting and any other
conditions that may affect its operation.
・
An accessory or other part that is damaged or
inoperable should be properly repaired or replaced.
When a switch becomes out of order, repairs should
be performed only by the sales agent from whom you
purchased the tool or an authorized dealer.
・
Do not use electric tools which cannot be activated or
stopped with a switch.
(21) Use recommended accessories.
・
Consult this manual or the sales agent from whom you
purchased the tool or an authorized dealer for
recommended accessories. The use of improper
accessories may cause risk of injury to persons.
(22) Repairs by authorized personnel.
・
This tool should not be modified as it meets safety
requirements.
・
Any repairs to the tool or installation of replacement
parts should be performed only by the sales agent
from whom you purchased the tool or an authorized
dealer.
・
Failure to utilize the expertise of the sales agent from
whom you purchased the tool or an authorized dealer
or, failure to use genuine replacement parts, may
result in an increased risk of injury to the user and
may invalidate your warranty.
3
WARNING
IMPORTANT SAFETY INSTRUCTIONS
FOR PORTABLE MAGNETIC DRILL
・
Use of power is limited to the power source specified
by the rating plate.
・
Do not use the power supply for the engine
powered welder.
・
The earth lead must not be connected to a gas pipe.
This may cause an explosion.
・
Make sure the Earth Clip and Earth Lead are not
faulty. If you have a tester or insulation resistance
meter, check for continuity between the Earth Clip and
the metal part of the body. Burying an earth rod or
earth plate in the ground and connecting the Earth
Lead is a job for a qualified electrician so you should
consult a nearby electrical contractor.
・
Before using the tool, make sure the power source
to which it will be connected is fitted with an earth
leakage breaker to prevent electric shock.
・
Extension cord should be selected after ensuring
the diameter is compatible with the length of the
extension. Beware of extremely long power cord
(particularly wound up thin cords) as they may cause
drops in voltage which weaken the magnetism,
adversely affecting the performance and function of
the tool. Do not share the extension cord with any
other electric machine tools. (Fig. 1)
(Fig. 1)
Extension Cable
Max. Length
Nominal cross-sectional area
10 m
1.25 mm
2
or more
15 m
2.00 mm
2
or more
30 m
3.50 mm
2
or more
QA4000(230V)
10.6.19, 12:52 AM
Page 4
Adobe PageMaker 6.0J/PPC