background image

8

7-3. MLG-50

Mounting

1. Hold the Spindle with pushing the Lock Button.
2. Insert the Driving Flange into the Spindle to fit 

the convex on the Spindle and groove of Driving 
Flange.

3. Insert the Grinding Wheel and Outer Flange into 

the Spindle.

4. In case the thickness of the Grinding Wheel is 

4mm or less, attach the Outer Flange up side 
down.

5. Secure it firmly to the Spindle by tightening the 

Outer Flange with Pin Face Wrench.

6. Secure Washer and Hex. Socket Button Head 

Screw 6×15 firmly to the Spindle by tightening 
the Socket Button Head Screw 6×15 with Hex. 
Socket Screw Key.

Removal 

1. Hold the Spindle with pushing the Lock Button.
2. Loosen the Hex. Socket Button Head Screw 6×

15 with Hex. Socket Screw Key and remove the 
Washer.

3. Loosen the Outer Flange with the Pin Face 

Wrench.

Spindle

Driving Flange

Grinding Wheel

Outer Flange

Pin Face Wrench

4mm or less

Washer

Hex. Socket Screw Key 4

Hex. Socket Button
Head Screw 6×15

Depress the Spindle
Lock Button.

Fig.10

8. HOW TO OPERATE THE TOOL

8-1. Start and Stop

To start, release the lock lever and grasp the throttle 
lever.
To stop, release the throttle lever.

MLG-25

Throttle Lever

Lock Lever

Release

Fig. 11

MLG-40, MLG-50, MLG-70

7KURWWOH/HYHU

/RFN/HYHU

5HOHDVH

Fig. 12

8-2. Adjust Valve 

WARNING

Be sure to keep hands clear of moving parts.
The desired number of rotation between maximum rpm 
and minimum rpm is obtained by turning the groove of 
valve clockwise or counterclockwise with screwdriver.

Maximum rotation

Position the groove of Adjust Valve horizontal to main 
body.

Minimum rotation

Position the groove of Adjust Valve vertical to main 
body.

Содержание MYTON MLG-25

















Отзывы: