7
MLG-50
0
0
$
%
&
Fig. 6
MLG-70
0
$
%
&
Fig. 7
MLG-25
MLG-40
MLG-50
MLG-70
A
58mm
(2-9/32”)
100mm (4”) 125mm(5”) 180mm (7”)
B
9.6mm
(3/8”)
16mm (5/8”) 22mm(7/8”) 22mm (7/8”)
C
3mm
(1/8”)
4mm(5/32”)
~
6.4mm(1/4”)
1mm(3/64”)
~
6.4mm(1/4”)
6mm (1/4”)
~
8mm (5/16”)
A : Diameter of the Grinding Wheel
B : Hole of the Grinding Wheel
C : Thickness of the Grinding Wheel
7. MOUNTING AND DISMOUNTING GRINDING WHEEL
WARNING
Always turn off the air supply and disconnect the air
supply hose.
Read and thoroughly understand
IMPORTANT
INSTRUCTIONS FOR GRINDER
before carrying out
these operations.
7-1. MLG-25
Mounting
1. Hold the Spindle with Spanner supplied.
2. Insert the Outer Flange into the center hole of the
Grinding Wheel.
3. Secure it firmly to the Spindle by tightening the
Outer Flange with Hex. Socket Screw Key.
Removal
Hold the Spindle with Spanner and loosen Outer
Flange with Hex. Socket Screw Key to remove the
Grinding Wheel.
Spindle
Spanner
Grinding Wheel
Outer Flange
Hex. Socket Screw Key 5
Fig. 8
7-2. MLG-40, MLG-70
Mounting
1. Insert the Outer Flange into the center hole of the
Grinding Wheel.
2. While depressing the Spindle Lock Button lightly,
place the Driving Flange on the Spindle and
rotate it until it comes to stop, then push the
Spindle Lock Button down to the hilt until comes
to lock the position.
3. Align the cutout of the Outer Flange with the
Parallel Key on the Spindle, place the set of the
Outer Flange and the Grinding Wheel on the
Spindle, and tighten it with the accessory Hex.
Socket Screw Key. Releasing your hand from the
Spindle Lock Button will automatically unlock the
Spindle.
Removal
1. While depressing the Spindle Lock Button lightly,
rotate the Grinding Wheel with your hand until it
comes to stop, and then deeply push the Spindle
Lock Button down to the hilt until comes to lock
the position.
2. Loosen the Disk Lock Bolt with the accessory
Hex. Socket Screw Key, and remove the Grinding
Wheel.
'ULYLQJ)ODQJH
6SLQGOH
'HSUHVVWKH6SLQGOH
/RFN%XWWRQ
*ULQGLQJ:KHHO
2XWHU)ODQJH
'LVN/RFN%ROW
+H[6RFNHW6FUHZNH\>0/*@
+H[6RFNHW6FUHZNH\>0/*@
Fig. 9
