5
EN
General Pneumatic Tool Safety Warnings
WARNING
z
Use the tool with proper air pressure.
,IWKHDLUSUHVVXUHLVKLJKWKHURWDWLRQVSHHGDQGUHFLSURFDWLRQIUHTXHQF\EHFRPHIDVWHUFDXVLQJGDPDJHVXFK
DVGDPDJHRUDFFHOHUDWHGZHDU$OVRXQH[SHFWHGDFFLGHQWVFRXOGRFFXU
z
Connect the tool to air piping.
,QVRPHIDFWRULHVRWKHUWKDQDLUSLSLQJWKHUHPD\EHRWKHUSLSLQJVXFKDVR[\JHQQLWURJHQJDVHWF%HIRUH
FRQQHFWLQJWRSLSLQJPDNHVXUHLWLVWKHFRUUHFWSLSLQJ
z
Do not start the tool carelessly.
7XUQRIIWKHRSHUDWLRQVZLWFKWKHQDWWDFKWKH&RQRVHWRWKHWRRO
z
When attaching, removing, and maintaining accessories, make sure to detach the Connecting Hose from the
tool.
z
Be cautious about exhaust.
3QHXPDWLFWRROH[KDXVWFRQWDLQVRLODQGGUDLQDJHHWF%HFDUHIXODERXWWKHH[KDXVWGLUHFWLRQVRWKDWWKHH[KDXVW
does not directly hit people nearby.
z
Do not allow sources of electricity to touch the tool.
7KHSQHXPDWLFWRROLVQRWLQVXODWHGDJDLQVWFRQWDFWE\HOHFWULFVRXUFHV%HFDXVHWKHUHLVDULVNRIHOHFWULFVKRFN
do not allow sources of electricity to touch the tool.
CAUTION
z
Handle the tool with care.
Rough handling could cause accidents or malfunctions. Do not exert an impact on the tool by throwing or
dropping it.
z
Handle the Connecting Hose with care.
'RQRWFDUU\WKHWRROE\KROGLQJWKH&RQRVHDQGGRQRWSXOOWKH&RQRVHWRUHPRYHLW
Safety Warnings for PNEUMATIC GRINDER
The following warnings are those required to be displayed as instructed by ISO11148-7.
General Safety Rules
WARNING
z
For multiple hazards, read and understand this instruction manual before installing, operating, repairing,
maintaining, changing accessories on, or working near this tool. Failure to do so can result in serious bodily
injury.
z
Only qualified and trained operators should install, adjust or use this tool.
z
Do not modify this tool. Modifications can reduce the effectiveness of safety measures and increase the risks
to the operator.
z
Do not discard this instruction manual; hand it to the operator.
z
Do not use this tool if the tool has been damaged.
z
This tool shall be inspected periodically to verify the ratings and markings. When a label/nameplate is
damaged, worn or missing, contact the sales agent through which you have purchased your tool or NITTO
KOHKI Co. Ltd. directly for a replacement.
