21
EN
1
Loosen the + Countersunk Head Screw
(
) of the Exhaust Cover and remove the
Exhaust Cover (
), Spacer (
), Exhaust
Filter (the
1st Filter), Exhaust Plate (
),
and Packing Cover (
)
1st Filter
2nd Filter
+ Countersunk Head Screw 4×14
Exhaust Cover
Spacer
Exhaust Filter
Exhaust Plate
Packing Cover
Grease Inlet
2
Use a grease gun to inject grease (Sumitec
305) into the Grease Inlet (
)
Use a grease gun nozzle with a tip outer diameter
of less than 3 mm.
The nozzle for a grease nipple cannot be used for
injection.
4
7
3
Perform a trial run and wipe off extra grease that seeps out
Attach a Connecting Hose to the Cupla of the tool and operate the tool.
$WWKDWWLPHJUHDVHPD\VFDWWHUIURPWKHH[KDXVWSDUWDQG*UHDVH,QOHWVRXVHZLWKFDUH
6WRSWKHWRROLQDIHZVHFRQGVDQGDOZD\VGHWDFKWKHWRROIURPWKH&RQRVHWKHQZLSHRIIDQ\JUHDVH
that seeps from the periphery of the Spindle.
4
Assembling the Exhaust Cover
Assemble the Exhaust Cover by performing the disassembly procedure in reverse.
MYG-50 uses two Exhaust Filters (
). Insert the Exhaust Filter (the
2nd Filter) under the Packing Cover so
that there is no clearance in the housing.
:KHQDVVHPEOLQJXVHFDUHIRUWKHRULHQWDWLRQRIWKH([KDXVW&RYHU
([KDXVW)LOWHUV
([KDXVW3ODWH
(
DQG3DFNLQJ&RYHU
).
Disposal
z
6HSDUDWHWKHWRRODFFHVVRULHVDQGSDFNLQJPDWHULDOVIRUHQYLURQPHQWDOO\IULHQGO\UHF\FOLQJ
z
:KHQGLVSRVLQJRIWKHWRROIROORZWKHUXOHVRIHDFKPXQLFLSDOLW\
