background image

6

5. MOUNTING AND DISMOUNTING GRINDING WHEEL

WARNING

Always turn off the air supply and disconnect the air 

supply hose.

Read and thoroughly understand 

IMPORTANT 

INSTRUCTIONS FOR GRINDER

 before carrying out 

these operations.

Mounting

1 Hold the Spindle with Spanner supplied.

2 Insert the Outer Flange into the Grinding Wheel.

3  Secure it firmly to the Spindle by tightening the 

Outer Flange with Hex. Socket Screw Key. 

Removal

Hold the Spindle with Spanner and loosen Outer 

Flange with Hex. Socket Screw Key to remove the 

Grinding Wheel.

+;

+

<; =>

 

*?+Q+Z

Fig. 4

6. HOW TO OPERATE THE TOOL

Start and Stop

To start, release the lock lever and grasp the throttle 

lever.

To stop, release the throttle lever.

Throttle Lever

Lock Lever

Release

Fig. 5

Adjust Valve 

WARNING

Be sure to keep hands clear of moving parts.

The desired number of rotation between maximum rpm 

and minimum rpm is obtained by turning the groove of 

valve clockwise or counterclockwise with screwdriver.

Maximum rotation

Position the groove of Adjust Valve horizontal to main 

body.

Minimum rotation

Position the groove of Adjust Valve vertical to main 

body.

;[\]

^?

^

Fig. 6

Содержание MLG-25











Отзывы: