11
EN
Changeover switch
CAUTION
z
Do not operate the changeover switch while the tool is rotating. Doing so could cause a failure.
z
When the tool is not used, set the switch to neutral position.
z
Do not apply a shock (such as dropping) or excessive load to the changeover switch. Doing so could cause a
failure.
By sliding the changeover switch, you can change the rotation direction of the electric screwdriver.
! - $ means neutral. The electric screwdriver does not rotate.
Rotates
counterclockwise
Rotates clockwise
Start and stop
WARNING
z
Never touch the bit while it is rotating.
z
Do not direct the bit toward people or animals.
CAUTION
z
Make sure to properly press the start switch.
Slide the changeover switch to the direction in which you want the tool to rotate and press the start switch to start.
Releasing the start switch stops rotation.
Lever start type
When you press the lever switch, the bit rotates.
Releasing the lever switch stops rotation.
For the lever start type, the lever switch work as the start
switch.
Push start type
The bit rotates when the electric screwdriver is pushed
in the bit direction.
Releasing it stops rotation.
The push start type has a start switch inside the electric
screwdriver.
TV07524-1̲DLV30A12P-AYK̲en.indb 11
2017/02/13 8:45:33
