background image

 

Ref No:

NISM/STPYAS/02    

Date:

16.04.09      

Issue:

2

• sensortec   • ST-PY-AS

• analogue addressable photoelectric sensor

instruction manual

sensortec

sensortec

9

Section 12 - DISPOSAL

This symbol on the ST-PY-AS indicates that this product must not be

disposed of with household waste. Instead, it is your responsibility to

dispose of your waste equipment by handing it over to a designated

collection point for the recycling of waste electrical and electronic

equipment. The separate collection and recycling of your waste

equipment at the time of disposal will help to conserve natural

resources and ensure that it is recycled in a manner that protects

human health and the environment. For more information about

where you can drop off your waste equipment for recycling, please

contact your local city office or your household waste disposal service.

Section 13 - ROHS COMPLIANCE

STATEMENT

(RoHS compliant and lead-free)

This product complies with the RoHS  (Restriction of Hazardous
Substances) directive.

This product complies with the RoHS  (Restriction of Hazardous
Substances) directive which restricts the use of six hazardous
materials in the manufacture of electronic and electrical equipment.

This product complies with the European Union RoHS  (Restriction of
Hazardous Substances) directive 2002/95/EC  which restricts the use
of the following six hazardous materials in the manufacture of
electronic and electrical equipment.

• Lead (Pb)
• Hexavalant Chromium
• Mercury (Hg)
• Cadmium (Cd)
• Polybrominated biphenyls (PBB’s)
• Polybrominated diphenyl ethers (PBDE’s)

www.acornfiresecurity.com

www.acornfiresecurity.com

Содержание Sensortec ST-PY-AS










Отзывы: