background image

Manual: EV-DPH Manual 000027  (Changes are subject to DCRN)

10

Section 12 - DISPOSAL

This symbol on the EV-DPH indicates that this product must not be

disposed of with household waste. Instead, it is your responsibility to

dispose of your waste equipment by handing it over to a designated

collection point for the recycling of waste electrical and electronic

equipment. The separate collection and recycling of your waste

equipment at the time of disposal will help to conserve natural

resources and ensure that it is recycled in a manner that protects

human health and the environment. For more information about

where you can drop off your waste equipment for recycling, please

contact your local city office or your household waste disposal service.

Section 13 - ROHS COMPLIANCE 

STATEMENT

(RoHS compliant and lead-free)

This product complies with the European Union RoHS  (Restriction of
Hazardous Substances) directive 2002/95/EC  which restricts the use
of the following six hazardous materials in the manufacture of
electronic and electrical equipment.

• Lead (Pb)
• Hexavalant Chromium
• Mercury (Hg)
• Cadmium (Cd)
• Polybrominated biphenyls (PBB’s)
• Polybrominated diphenyl ethers (PBDE’s)

• Ref No: NISM/EV-DPH/01 •  May 2010 •  Issue: 1

•  Evolution  •  EV-DPH  •  analogue addressable 

photoelectric / heat sensor 

Содержание EV-DPH











Отзывы: