background image

Manual: EV-DP Manual 000016  (Changes are subject to DCRN)

Section 6 - SPECIFICATIONS

Model Reference:

- EV-DP

Computer Reference:

- F14N82105

Sensor Type:

- Dual wavelength  

photoelectric smoke
sensor

Sensitivity:

- Uniform response in all

EN-54 Fire Tests

Operating Current:

- 200 microamps

fire alarm (LED on)
5.2mA

Standard:

- EN54 Part 7:2001

Mass:

- 118g (excluding base)

Charging Time:

- 20 seconds

Ambient Temperature
Range:

- -10 ºC to +55 ºC

IP Rating:

- 41

Certified to standard:
CE certificate:

- 0832-CPD-0219

LPCB certificate:

- 041f/02

Section 7 - ENVIRONMENTAL

PARAMETERS

Temperature Considerations:

Over the range from -10 ºC to +55 ºC

Humidity:

Relative Humidity of up to 95%, measured at 50 ºC,
non condensing.

Section 8 - EMC

Installation

The installation shall be in accordance with the regulations either of
the approval body for an approved system, or otherwise, to the
national code of practice/ regulations for the installation of the fire
alarm system, e.g. BS 5839 part 1.

Electromagnetic Compatibility (EMC)

On a site where there is an unusually high level of potential electrical
interference, e.g. where heavy currents are being switched or where
high levels of R.F. are prevalent, care then must be taken in the type
and routing of cables.  Particular care should be given to the
separation of zone wiring from the cable carrying the interference.

7

• Ref No: NISM/EV-DP/03  • Date: 16.04.09  •  Issue: 3

•  Evolution  • EV-DP •  analogue addressable photoelectric sensor 

instruction manual

Содержание EV-DP











Отзывы: