nitedevil CAM630, Руководство пользователя, Страница: 9 / 12

www.nitedevil.com Doc XCAM630
NiteDevil Hi-Res 600TVL Colour Dome Camera
Email: support@nitedevil.com Last Revised: 15/06/2012
9.1.1 NUMBER Select an ID number between 000 ~ 255 for RS485 control
9.1.2 POSITION Select position by using UP and DOWN button and pressing
Menu. You can only move number position using the LEFT or
RIGHT button. Press Menu to set.
9.2 MOTION This option provides a display when motion detected.
Display is MOTION AT: <n> (where n = zone 1 ~ 4)
9.2.3 HEIGHT Set Vertical Size
You can increase or decrease the size of the vertical plane of the zone between 12 ~ 100 by using
LEFT or RIGHT button.
9.2.4 MOVE X Move Horizontal Position
You can move the horizontal position of the zone between 8 ~ 92 by using LEFT or RIGHT button.
9.2.5 MOVE Y Move Vertical Position
You can move the vertical position of the zone between 6 ~ 94 by using LEFT or RIGHT button.
9.2.6 SENSITIVITY Select Sensitivity of Motion Detection
You can adjust the sensitivity of motion detection between 0 ~ 100 by using the LEFT or RIGHT
button.
9.2.1 ZONE AREA 4 zones available
Select ZONE AREA using UP or DOWN button.
Up to 4 zone areas can be selected.
9.2.1 ZONE STATE Select Zone ON/OFF
Select ON or OFF using LEFT or RIGHT button.
9.2.2 WIDTH Set Horizontal size
You can increase or decrease the size of the
horizontal plane of the zone between 16 ~ 100 by
using LEFT or RIGHT button.