![background image](http://html1.mh-extra.com/html/nissen/variosign-series/variosign-series_translation-of-original-operating-instructions_1695990029.webp)
© 2017 Adolf Nissen Elektrobau GmbH + Co. KG
Construction and function
Variable Message Sign
29
·
The remote control automatically connects to the selected
system.
If the remote control parameters differ from the selected system,
the message
"NEW????"
appears).- In most cases, select
"Remote control"
here and confirm with
[OK]
. "Master board"
is only selected in a special case if a board has been replaced.)
·
The parameters are exchanged between the control of the system and the remote control.
·
The new installation is thus complete.
A connection to the variable message sign/lighting arrow can be established at any time with the
[F4]
selection key.
Changing inputs:
·
Press
[F4]
.
·
Press on the
symbol in the touchscreen field or the
[ I ]
key
·
Select
[S2]
(change).
·
Select variable message sign/lighting arrow (
[F1]
-
[F4]
and
[S1]
-
[S4]
- possible selection is
displayed).
·
Select the type of system to be controlled again using cursor keys
[
]
or
[
]
and confirm with
[OK]
.
·
Change designations ID1 and ID2 using the touchscreen keyboard.
·
Confirm the ID entry with
[OK]
or the
touch field.
Deleting entries:
·
Press the
[F4]
.
·
Press on the
symbol in the touchscreen field or the
[ I ]
key
·
Select
[S3]
(delete).
·
Select variable message sign/lighting arrow (
[F1]
-
[F4]
and
[S1]
-
[S4]
- possible selection is
displayed).
·
The selected variable message sign/lighting arrow is deleted and the memory location is released
again.
(The memory location currently in use cannot be deleted).
Each step can be left again with the
symbol in the touchscreen field or with the
[ 0 ]
key.
During radio operation, the operating time with the integrated LiFePO
4
battery is approx. 12 hours. As
soon as the remote control is placed on the charging station, it is charged by an automatic charger.
The charge status is indicated by an incremental battery symbol on the display. If the symbol is static
at 100%, the battery is fully charged.
Depending on the condition of the battery, the charging time is a maximum of 6 hours.
To increase the operating time of the radio remote control, the display lighting switches to idle state
after approx. 20 seconds, it only switches on again when a key is pressed.
Cable operation is mainly intended for ensuring the function of the remote control if the battery is
empty or there is a malfunction of the radio link. The internal battery of the remote control is charged
during cable operation. If the cable connection is not used, the plug connector and socket must be
protected by the caps provided.
Содержание VarioSign Series
Страница 2: ......
Страница 38: ......
Страница 39: ......
Страница 43: ...2017 Adolf Nissen Elektrobau GmbH Co KG Dimensions Variable Message Sign 43...