nissen Star-Flash LED 620A, Руководство по эксплуатации

Страница: 26 / 30

© 2017 Adolf Nissen Elektrobau GmbH + Co. KG
ENGLISH
Star-Flash LED 620B/ 627B FÜQ
26
2.4 Technical data
Voltage:
Aver. power consumption day:
Aver. power consumption night:
Flashing rate:
Moving light stability:
Operating times:
Weight:
Measurement:
Operating temperature:
6 Volt
0,05 A
0,03 A
60 fl/min
about 12 hrs.
180 hrs. with battery Premium 800
800 hrs. with battery Premium 3000
about 1,8 kg
w= 205 mm, h= 370 mm, d= 95 mm
-25°C to +65°C
All specifications under laboratory conditions.
2.5 Troubleshooting
Fault Remedy
Lamp does not flash: Check battery - replace if necessary.
No synchronisation of the lamps: Lamps lined up correctly?
Line up the lamps again if necessary!
Repeat synchronisation by switching on/off again.
Clean reception and transmitting diodes.
Yellow control LED flashes: Battery is empty. - Change battery!
2.6 Disassembly and disposal
2.6.1 Disassembly
Before beginning the disassembly:
•
Switch off the system and secure against being switched on again.
•
Physically disconnect the entire power supply from the equipment and discharge stored residual energy.
Then professionally clean modules and components and disassemble in accordance with accepted local safety at work and en-
vironment protection regulations.
2.6.2 Disposal
If no take back or disposal agreement was made, take disassembled component parts to the recycling depot:
•
Dispose of metallic residual component parts as scrap metal.
•
Take plastic parts to the recycling depot.
•
Sort and dispose of other components according to the properties of the material.
CAUTION!
Damage to the environment from improper disposal!
Electronic scrap, electronic components, lubricants and other auxiliary substances are liable to treatment as
hazardous waste and must only be disposed by approved specialised companies!
Local authorities and specialist disposal companies can provide information on environmentally compatible disposal.