© 2017 Adolf Nissen Elektrobau GmbH + Co. KG
ESPAÑOL
BakoLight LED GPS/2
30
Indicador de baja tensión
Si la tensión de la pila es inferior a 4 voltios, la luz destella solo cada 2 segundos (normalmente lo
hace una vez por segundo). Esta función se mantiene por lo menos durante 16 horas.
Varios
Función de control del LED del circuito impreso (solo visible con la lente retirada):
El LED tiene varias funciones de control. Al encender el generador de impulsos se puede controlar el
funcionamiento del interruptor de posición. El LED destella según la posición del interruptor (p. ej.:
posición 1 = 1 destello, posición 2 = 2 destellos, etc. posición 0 = 10 destellos). En el modo normal se
puede reconocer si el foco se ha sincronizado con la señal GPS. Si el LED destella con el ciclo de
intermitencia, el foco está sincronizado. Si el LED no se enciende, el foco no está sincronizado.
Retirar el circuito impreso
•
Desatornillar la lente.
•
Suelte los cables del borne y desenrosque los 4 tornillos del circuito impreso.
•
Ahora ya puede sacar el circuito impreso.
CIUDADO !
El circuito impreso solo se debe desmontar si la pila ha quedado adherida.
3.4
Montaje
Poner el foco en los postes de señalización y vallas de
seguridad:
•
Afloje el tornillo de seguridad lateral.
•
Inserte el foco en el poste o similar.
•
Fije y asegure el foco BakoLight enroscando el tornillo de
seguridad.
Fijar el foco BakoLight mediante el soporte con brida de
horquilla previamente desmontado:
•
Vuelva a replegar la brida y ponga la horquilla en torno al
pivote o al tubo.
•
Solape la brida y apriete las tuercas con la llave NiKo.
Fijar el foco BakoLight mediante el soporte previamente
montado en las barreras:
•
Retire el tornillo con la llave NiKo.
•
Empuja el foco BakoLight bajo el borde de la barrera.
•
Atornille el BakoLight con el soporte en la barrera.
Содержание BakoLight LED GPS/2 L8G
Страница 2: ......