10
TOLL FREE:
1-877-646-5288
bowl aligning the arrow ( ) located on
the lid with the arrow ( ) located on the
bowl’s handle. (
Fig. 3
)
7
Push down on the “PULSE” on the handle
to start the appliance. (
Fig. 4
)
NOTE
: Pulse ingredients for even
chopping by pressing down in short
intervals.
IMPORTANT:
When using the dough
blade or cookie paddle hold the
appliance to secure the appliance to the
counter or table top.
8
When you have reached your desired
consistency, stop pressing the lid handle
and wait for the attachment to stop
turning.
9
To remove the lid, pull the lid handle up
to a 90° angle. Turn the bowl clockwise
to lift off the base. (
Fig. 5, Fig. 6
)
CAUTION:
Never insert your hands in the
pitcher as the blades are sharp. Always
use a spatula to dislodge food that has
stuck to the sides of the pitcher.
10
Make sure that the unit is unplugged
when not in use.
IMPORTANT:
Make sure that the motor
base is plugged in for use.
1
Place the motor base on a clean, dry,
level surface such as a counter or table
top.
2
Align and lower the bowl onto the motor
base. (
Fig. 1
) Handle should be aligned
slightly to the left of the “
LOCK
” symbol
on the motor base.
3
Rotate the container to the left as far as
it will go to lock in place. (
Fig. 1
)
4
Holding the desired attachment by the
shaft, place it onto the drive gear inside
the container. Ensure that the attachment
is seated properly and is standing
upright. (
Fig. 2
)
NOTE
: The blade will fit loosely on the
drive gear.
5
Add the ingredients to the bowl, making
sure that they do not exceed the highest
measured marking line on the side of the
bowl.
6
Holding the lid by the handle in the
upright position, place it on top of the
Assembly and Use for the 40-oz. Bowl
Fig. 4
Fig. 5
Fig. 6
Fig. 2
Fig. 1
Shaft
Fig. 3
Or
ASSEMBLY
PULSE
REMOVAL
It’s best to add the liquid ingredients first and then the dry ingredients.
BL204W_30_IB_ENG_110810_1.indd 10
11-08-10 7:27 PM
