En
g
lis
h
11
12
www.ninjakitchen.com
1-877-646-5288
10
Review warning and caution statements on page
10 before proceeding.
11
Select the speed that best suits your needs.
(Fig. 6)
NOTE:
Pulse ingredients for even chopping by pressing
down in short intervals.
12
When you have reached your desired consistency, stop
the appliance by pressing the power button ( ) and
wait for the Stacked Blade Assembly to stop turning.
(Fig. 7)
13
To remove the lid, press the release button on the lid,
pull the lid handle up to a 90° angle and lift the lid off.
Turn the pitcher counterclockwise and then lift off the
base.
(Fig. 7, Fig. 8)
WARNING: Never insert your hands in the pitcher
as the Stacked Blade Assembly is sharp. Always
use a spatula to dislodge food that has stuck to
the sides of the pitcher.
Assembly and Use of the - cont.
14
Depending on the consistency of the contents in the
container, open the pour spout cap and use the spout
to empty liquid contents.
15
For thicker consistencies, remove the lid and Stacked
Blade Assembly carefully (by its shaft), then empty
contents from the container. To remove the lid, press
the release button on the lid and pull the lid handle up
to a 90
°
angle and lift the lid off the blender pitcher.
16
Make sure that the unit is unplugged when not in use.
17
To release the motor base from the counter or table top,
place your hands underneath both sides of the motor base
and gently pull the unit up and towards you.
(Fig. 9)
Assembly and Use of the Nutri Ninja
™
Cup
ASSEMBLY
USE
REMOVAL
For best results, use short “
PULSES
”... Practice makes perfect!!
Fig. 6
Fig. 3
Fig. 2
Fig. 1
Fig. 8
Fig. 7
Fig. 9
USE
REMOVAL
WARNING: Handle the Nutri Ninja Blade Assembly with care, as the blades are sharp.
WARNING: Never leave the appliance unattended while in use.
WARNING: Remove utensils prior to processing. Failure to remove may cause the bowl to be damaged or to
shatter, which may cause personal injury.
CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the
user being burned.
CAUTION: Remove the Nutri Ninja Blade Assembly from the cup upon completion of blending. Do not store
ingredients before or after blending in the Nutri Ninja cup with the blade assembly attached. Some foods
may contain active ingredients or release gases which will expand if left in a sealed container, resulting in
excessive pressure buildup that can pose a risk of injury.
IMPORTANT: Make sure that the motor base is plugged in for use.
Fig. 5
Fig. 4
Fig. 6
1
Review warning and caution statements above before
proceeding to number 2.
2
Place the motor base on a clean, dry, level surface such
as a counter or table top. Press down on the motor
base to make sure that the suction cups adhere to the
counter or table top.
3
Add ingredients to the Nutri Ninja cup.
4
Place the Nutri Ninja Blade Assembly onto the cup and
screw it tightly until you have a good seal.
(Fig. 1)
5
Turn the Nutri Ninja cup upside down and place it
onto the motor base, aligning the tabs on the cup with
the motor base. Turn the Nutri Ninja cup clockwise to
lock into place. You will hear a click when the lock is
engaged.
(Fig. 2)
Turn the power button on, the Single
Serve button will illuminate.
6
Press down on the Single Serve button in short
intervals to activate.
(Fig. 3)
7
Once you have reached your desired consistency, turn
the power button off. Turn the Nutri Ninja cup counter
clockwise and pull straight up to remove.
(Fig. 4, Fig. 5)
NOTE:
Do not overfill! To avoid spilling, do not add
ingredients past the “Max” fill line.
8
Turn the cup upright and remove the Nutri Ninja Blade
Assembly by twisting the blade assembly clockwise.
(Fig. 6)
9
Do not store blended contents with the Nutri Ninja
Blade Assembly attached.
10
Place the To-Go drinking lid onto the Nutri Ninja cup,
twist to seal and enjoy!
11
Be sure to store the Nutri Ninja Blade Assembly
attached to an empty cup when not in use.
12
Make sure that the motor base is unplugged when not
in use.
13
To release the motor base from
the counter or table top, place your
hands underneath both sides of
the motor base and gently pull the
unit up and towards you.
(Fig. 7)
NOTE:
To order additional Nutri
Ninja Cups, please visit our website:
www.ninjakitchen.com or feel free to contact customer
service: 1-877-646-5288.
Fig. 7
