21
AU
ninjakitchen.com.au |
NZ
ninjakitchen.co.nz
20
AU
02 8801 7666 |
NZ
0800 112 660
CARE & MAINTENANCE
CLEANING
CAUTION: Make sure that the motor base
is unplugged from the power source
before inserting or removing any
attachment and before cleaning.
CAUTION: DO NOT immerse the motor
base into water or any other liquid.
Separate all parts. Wash bowl in warm,
soapy water with a soft cloth.
Hand-Washing
Wash the containers, lids, blade assemblies
and attachments in warm, soapy water.
When washing the blade assemblies, use a
dish-washing utensil with a handle to avoid
direct hand contact with blades. Handle blade
assemblies with care to avoid contact with
sharp edges. Rinse and air dry thoroughly.
Dishwasher
The containers, lids, blade assemblies and
attachments are all dishwasher safe. The lids
and blade assemblies are top rack dishwasher
safe. Ensure that the blade assemblies are
removed from the containers before placing
in the dishwasher.
WARNING: Handle the blade assemblies
with care when washing, as the blades
are sharp. Contact with the blades’
edges can result in laceration.
Wipe the motor base clean with a damp cloth
If the appliance needs servicing please call
customer care at
AU
02 8801 7666 or
NZ
0800 112 660
STORING
1
Store the Nutri Ninja
|
Ninja Blender Duo
with Auto-iQ Technology upright with the
blade assembly inside the corresponding
container with the lid secured on top. Do
not place anything on top. Store the rest
of the attachments in a safe place where
they will not be damaged and won’t
cause harm. Loosely wrap the power cord
around the motor base
RESETTING THE MOTOR THERMOSTAT
Store the Nutri Ninja |
Ninja Blender System
with Auto-iQ Technology features a unique
safety system which prevents damage to
the unit’s motor and drive system should
you inadvertently overload your appliance.
If the appliance is being overloaded, the
motor will stop. Allow the appliance to
cool for approximately 15 minutes.
To
reset the appliance, follow the resetting
procedure below:
1
Unplug the appliance from the
electrical outlet.
2
Remove and empty the container and
ensure that no food is jamming the
blade assembly.
3
Allow the appliance to cool for
approximately 15 minutes.
4
Re-install the container onto the base
and re-plug the appliance into the
electrical outlet.
5
Proceed to use the appliance as
before making sure not to exceed the
recommended maximum capacities.
NOTE
: Do not store blended or unblended
ingredients in the Nutri Ninja Cup with the
blade assmbly attached.
TROUBLESHOOTING GUIDE
WARNING: To reduce the risk of shock and unintended operation,
turn power off and unplug unit before troubleshooting�
Motor Doesn’t Start or Blade Assembly Doesn’t Rotate.
• Make sure the container is securely locked into the motor base.
• Make sure the lid is securely on container in the correct position (align arrows).
• The appliance is turned Off. Press the power button to turn On.
• Check that the plug is securely inserted into the electrical outlet.
• Check the fuse or circuit breaker.
• The unit has overloaded. The appliance will stop and the power light will flash. Unplug
and wait approximately 15 minutes before using again.
• The unit has overheated. Unplug and wait approximately 15 minutes before using again.
• Check to make sure the unit is not overloaded.
Food is Unevenly Chopped.
•
Either you are chopping too much food at one time, or the pieces are not of even size
and processing smaller amounts per batch.
Food is Chopped Too Fine or is Too Watery.
• The food has been over processed. Use Auto-iQ PULSE button for controlled processing.
Food Collects On Lid or On the Sides of the Container.
• The mixture is too thick. Add more liquid.
You Cannot Achieve Snow From Solid Ice.
• Do not use ice that has been sitting out or has started to melt. Use ice straight from the
freezer. Start with a few pulses and then go to a continuous blending cycle.
You Cannot Achieve Snow From Solid Ice.
• Do not use ice that has been sitting out or has started to melt. Use ice straight from the
freezer. Start with a few pulses and then go to a continuous blending cycle.
Motor Base Won’t Stick to Counter or Tabletop.
• Make sure surface and suction feet are wiped clean. Suction feet will only stick to
smooth surfaces. Suction feet WILL NOT stick on some surfaces such as, wood, tile and
non-polished finishes.
•
DO NOT
attempt to use appliance when the motor base is stuck to a surface that is not
secure, (cutting board, platter, plates, etc.).
You get an “Err” Message.
• Your unit is able to detect which jar is on the base. You may be trying to use a
program that is not designed for the jar you have installed. The programs will light up
indicating which programs are available for each jar.
You have a blinking red light.
• The unit is not installed properly. For your safety the unit will only be able to be turned
on when it is properly assembled. Please refer to the assembly pages of this inspiration
guide for assistance.
