30
ninjakitchen.eu
ninjakitchen.eu
31
PARTS
D
BEFORE FIRST USE
A
Cleaning Brush
B
Tamper
C
Food Tray
D
Feed Chute Chamber
with Anti-Drip Lever
E
Auger
F
Black Filter (low pulp)
G
Grey Filter (medium pulp)
H
Orange Filter (high pulp)
I
Inner Pulp Spout
J
Outer Pulp Spout
K
500ml Juice Jug
L
710ml Pulp Container
M
Motor Base (power cord not shown)
B
A
C
E
G
H
K
M
L
F
ORDERING REPLACEMENT PARTS
To order additional parts and attachments,
visit
ninjakitchen.eu
NOTE:
For best results, we recommend using the
Grey (Medium Pulp)
or
Orange (High
Pulp) filter
when processing soft fibrous fruits like berries, seeded melons and pineapple.
I
HIGH PULP
Use the
orange filter
with the
largest mesh
for juice
with lots of
pulp.
MEDIUM
PULP
Use the grey
filter with the
larger mesh
for juice with
some pulp.
LOW PULP
Use the black
filter with the
finest mesh
for juice with
minimal pulp.
J
ENGLISH
1
Remove all packaging materials from the unit.
2
Disassemble and clean all parts before first use. Wash parts in
warm, soapy, water, then thoroughly rinse and air-dry all parts.
3
Wipe control panel with a soft cloth. Allow it to dry completely
before using.
4
Assemble as per instructions on page 32.
IMPORTANT:
Review all
warnings on pages 28-29
before proceeding.
NOTE:
All attachments
are BPA free and
dishwasher safe.
NOTE:
The feed chute chamber (D), auger (E), orange
filter (H) and 2-part spout (I,J) are pre-assembled.
FEATURES
USING THE CONTROL PANEL
USING THE FILTERS FOR PULP CONTROL
START/STOP
Press once to start continuous running up to 12 minutes; press again to stop.
REVERSE
If the feed chute chamber becomes blocked or ingredients are not
processing, press and hold REVERSE. There will be a beep and a brief
pause, then the auger will rotate in the opposite direction. Release
REVERSE to stop. Repeat as needed. Press START/STOP to resume
normal operation.
Control the amount of pulp by choosing the desired filter.
