manualshive.com logo in svg

Ningbo SSPP, Инструкция по эксплуатации, Страница: 1 / 44

Поделиться
Скачать
Ningbo SSPP Скачать руководство пользователя страница 1

Contents

Important Information ······················ 2
1. Safety ····································· 4

1.1 Warnings ·······································4
1.2  General Precautions ························6
1.3  Safety Devices and Protective Guard ······14
1.4  Protective Equipment ····················· 15
1.5 Noise ·········································· 15
1.6 Vibration ······································ 15

2. Outline ···································16

2.1  Name of Parts and Their Functions ··· 16
2.2  Specification ································ 17
2.3  Attached Material ································17
2.4  Position of Model and Serial No. ······· 18
2.5 Consumables ······························· 18

3.  Installation and Adjustment ·········19

3.1  Installation and Removal of Saw  

 

Chain/Guide Bar ··························· 19

3.2  Installation Method ························ 22

4. Operation ·······························24

4.1  Transporting method ······················ 24
4.2  Pre-operation Check ······················ 26
4.3  Start and Stop ······························ 27
4.4  Precautions for Operation ··············· 28
4.5  Pruning Operation ························· 29
4.6  Actions after Operation ··················· 30

5. Maintenance ···························31

5.1  Before/During Operation or When  

 Refueling ····································· 32

5.2  Before Operation ··························· 36
5.3  After Operation ····························· 37
5.4   Every 20 hours or Every 3 months ··· 38

6. Storing ···································39
7.  Waste Disposal ························41
8. Troubleshooting ·······················41
9.  Service after Sales ···················42
10. Technical data  ························43
EC Declaration of Conformity
              (Applies to Europe only) ······44

Copyright (C) 2012  NINGBO LIHAO MACHINERY CO.,LTD. All Rights Reserved

For Safe Use of  Pole Pruner Attachment

 

● Be sure to read this manual and the powerhead 

(separately sold) manual to have a good understanding 
of the contents before handling the pole pruner.

 

● If there is no powerhead manual, purchase it from 

sales agency.

 

● Keep this manual and the powerhead manual carefully 

in a readily accessible location.

Pole Pruner Attachment

SSPP

Instruction Manual

Original Instruction

Содержание SSPP













































Отзывы:

Нет отзывов