Original instruction
6 / 20
with the equipment. A charger that is suitable for one type of battery pack may create a risk of fire when used with another
battery pack.
o) Do not use any battery pack which is not designed for use with the equipment.
p) Keep battery pack out of the reach of children.
q) Retain the original product literature for future reference.
r)
Remove the battery from the equipment when not in use.
s) Dispose of properly.
t)
Use a charger approved according to EN 60335-2-29
INSTRUCTIONS BEFORE USAGE
1. Before using your cordless chain saw
Your Battery Pack is UNCHARGED and it must be fully charged once before it is used.
The battery charger supplied is matched to the Li-ion battery for use with this tool. Do not use another battery
charger.
2. Charging your Battery Pack
The Li-ion battery is protected against over discharging. When the battery is empty, the trimmer will switch off
by means of a protective circuit: The trimmer head will stop rotating.
Note: In a warm environment or after heavy use, the Battery Pack may become too hot to permit charging.
Allow time for the battery to cool down before recharging.
3. Storage of the charger and battery
For long-term storage, it is preferable that the battery is fully charged and stored in a dry place at a
temperature between 10 and 25 ° C.
The charger should be stored in the same conditions as the battery, taking care that no foreign objects such as
metal chips or other can not enter through the ventilation slots of the charger.
Chain Saw Safety Warnings
1. Keep all parts of the body away from the saw chain when the chain saw is operating. Before you start the chain saw, make
sure the saw chain is not contacting anything. A moment of inattention while operating chain saws may cause entanglement
of your clothing or body with the saw chain.
2. Always hold the chain saw with your right hand on the rear handle and your left hand on the front handle. Holding the chain
saw with a reversed hand configuration increases the risk of personal injury and should never be done.
3. Hold the power tool by insulated gripping surfaces only, because the saw chain may contact hidden wiring. Saw chains
contacting a live wire may make exposed metal parts of the power tool live and could give the operator an electric shock.
4. Wear safety glasses and hearing protection. Further protective equipment for head, hands, legs and feet is recommended.
Adequate protective clothing will reduce personal injury by flying debris or accidental contact with the saw chain.
5. Do not operate a chain saw in a tree. Operation of a chain saw while up in a tree may result in personal injury.
6. Always keep proper footing and operate the chain saw only when standing on fixed, secure and level surface. Slippery or
unstable surfaces such as ladders may cause a loss of balance or control of the chain saw.
7. When cutting a limb that is under tension be alert for spring back. When the tension in the wood fibres is released the spring
