47
K01/03/23.12.2021
Guidance and manufacturer’s declaration – electromagnetic emissions
The device is intended for use in the electromagnetic environment specified below. The customer or the user of the device
should assure that it is used in such an environment.
Radiated RF
IEC61000-4-3
(Test
specifications
for
ENCLOSURE
PORT
IMMUNITY to
RF
wireless
communica-
tions
equipments
Test
Frequency
(MHz)
Band a)
(MHz)
Service a)
Modulation b)
Modulation b)
(W)
Distance
(m)
IMMUNITY
TEST LEVEL
(V/m)
385
380-390
TETRA 400
Pulse
modulation b)
18 Hz
1.8
0.3
27
450
380-390
GMRS 460,
FRS 460
FM c)
± 5 kHz
deviation
1 kHz sine
2
0.3
28
710
704-787
LTE Band
13.17
Pulse
modulation b)
217 Hz
0.2
0.3
9
745
780
810
800-960
GSM 800/900,
TETRA 800,
iDEN 820,
LTE Band 5
Pulse
modulation b)
18 Hz
2
0.3
28
870
930
1720
1700-1990
GSM 1800;
CDMA 1900;
GSM 1900;
DECT;
LTE Band 1, 3,
4, 25;
UMTS
Pulse
modulation b)
217 Hz
2
0.3
28
1845
1970
2450
2400-2570
Bluetooth,
WLAN,
802.11 b/g/n,
RFID 2450,
LTE Band 7
Pulse
modulation b)
217 Hz
2
0.3
28
5240
5100-5800
WLAN 802.11
a/n
Pulse
modulation b)
217 Hz
0.2
0.3
9
5240
5785
Note:
If necessary to achieve the IMMUNITY TEST LEVEL, the distance between the transmitting antenna and the ME
EQUIPMENT or ME SYSTEM may be reduced to 1 m. The 1 m test distance is permitted by IEC 61000-4-3.
a. For some services, only the uplink frequencies are included.
b. The carrier shall be modulated using a 50 % duty cycle square wave signal.
c.
As an alternative to FM modulation, 50 % pulse modulation at 18 Hz may be used because while it does not
represent actual modulation, it would be worst case.
The MANUFACTURER should consider reducing the minimum separation distance, based on RISK MANAGEMENT, and
using higher IMMUNITY TEST LEVELS that are appropriate for the reduced minimum separation distance. Minimum
separation distances for higher IMMUNITY TEST LEVELS shall be calculated using the following equation:
𝐸 = 6/𝑑√𝑃
Where P is the maximum power in W, d is the minimum separation distance in m, and E is the IMMUNITY TEST LEVEL
in V/m.