UNPACKING
Installing and connecting your amplifer is straightforward and the
following steps will assist you in getting it up and running in a short
amount of time.
The Arcus amplifer is composed of two units:
•
The Amplifer Unit
•
The Power Supply Unit
Important Note
Do not try to stack the amplifer and the power supply units
on top of each other as they haven’t been designed for that.
Each component requires its own shelf in your audio
component rack, or if installed on the foor they should sit
on their own decoupling platforms.
The package also contain the following parts:
•
An accessories box with the remote control and a hex tool
allowing the removal of the screws holding the plexiglas
front panel.
•
The original kit of tubes kit as provided from the
manufacture consisting of four
6L6GC
and two
6SN7
tubes.
•
Two cables with circular connectors for connecting the
power supply unit to the amplifer unit.
•
One IEC mains power cable.
Please inspect the package contents for missing parts or transport
damage. Both units are quite heavy so we recommend that you
leave them in their package until you have decided where to install
them in the next section.
Arcus Integrated Amplifer
Owner’s Manual
Page 3