Nimbus Water Systems Arcus Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 30

Nimbus Water Systems Arcus Скачать руководство пользователя страница 10

To ensure a correct connection, chassis sockets are labelled A and
B:

•

Connect one cable from connector A on the amplifer to
connector A on the power supply unit

•

Connect the second cable from connector B on the amplifer
to connector B on the power supply unit

Follow these steps to connect the power supply and amplifer units:

•

Ensure the mains power cord isn’t connected to the power
supply unit!

•

Start with the A connection on the amplifer side: align the
cable connector to the socket and screw the circular
connector in fully. If you have troubles making the
connection, ensure the two sides are lined up correctly.

•

Connect the other end of the cable to the A power supply
connector and screw it in fully.

•

Repeat the steps above with the B connection, starting with
the amplifer then the power supply.

Note

The provided power cables have black and white coloured
end sleeves to assist you in making the correct
connections but are internally and electrically identical.

Audio input connections

The Arcus amplifer offers four XLR balanced inputs to connect
analog audio sources such as phono preamplifers, digital to analog
converters (DACs) and more.
If you desire to use unbalanced sources, a simple RCA to XLR
adapter will be sufcient. We however recommend that you always

Arcus Integrated Amplifer

Owner’s Manual

Page 10

«
...
8
9
10
11
12
...
»

Содержание Arcus































Отзывы:

Нет отзывов